Stainless steel wall pass-through mailbox designer model - GIRA System 106 - VIDEO Complete kit

Stainless steel wall pass-through mailbox designer model - GIRA System 106 - video intercom - VIDEO Complete kit

High-quality manufactured pass-through mailbox of the brand Briefkasten Manufaktur. Due to the variable shaft length between 270mm to 400mm, this mailbox can be used in pretty much all masonry. The mail removal takes place on the back. The front and rear stainless steel plates made of 2mm stainless steel V2A, ground can be mounted invisibly on the wall thanks to the screw connection inside the shaft. No fastening screws are visible. Seamlessly integrated Gira System 106 in flush design. 3 GIRA system modules are included, so the letterbox can be used directly. The matching GIRA home station and control unit to complete this letterbox are included. The modules can be subsequently replaced as desired due to the simple holding system.

This is a real eye-catcher among the letterboxes. Clear lines and no-frills design characterize the designer mailbox with GIRA System 106. Our products have a high value, reliable functionality and their own identity. Made by Briefkasten Manufaktur.

• Designer stainless steel pass-through mailbox made of 2 mm stainless steel V2A, 1.4301 240 grain ground.
• Rear mail removal door 300x100mm, to open from left to right. Incl. 2 keys with key number.
• Mail slot from front, dimensions of slot: W 32 cm x H 6.3 cm, C4 landscape. Very large letters fit in here without bending. Attention no removal protection!
• Dimension front panel W 450mm x H 500mm.
• Dimension cover plate with removal door W 450mm x H 250mm.
• Dimension letter chute W 380mm x H 210-280mm.
• Variable shaft length 270-400mm.
• Nameplate made of stainless steel, ground. Your name is optionally lasered on the nameplate.
• Optionally with house number, lasered.
• Incl. GIRA home station & control unit enclosed, System 106 door station module, info module & camera module installed.

Camera module Gira System 106 - 5561 000, installed without wiring

• A high-quality camera with high light sensitivity is concealed behind the replaceable black glass pane. Thanks to a detection angle of 100°, the user is always in the picture about what is happening outside his front door.

Info module Gira System 106 - 5560 920, installed

• For house numbers that need to be clearly visible.

Door station module Gira System 106 - 5565 920, installed without wiring

• Compact voice module with integrated call button for communication between inside and outside.
• A high-quality microphone and a weatherproof loudspeaker ensure good communication.
• Power supply via 2-wire bus. Additional connection for ZV (e.g. necessary from 3rd camera module).
• All other System 106 modules (except voice module) are supplied with voltage via the door station module.

Home station Gira video surface-mounted 7 1209xx, enclosed

• Video home station with a 17.78 cm (7") TFT color display and convenient hands-free function for surface mounting or wall mounting with flush-mounted device box or cavity wall box. With the optional stand (see accessories) also suitable for placement on furniture. A 32 GB SD memory card is included for internal image storage. Full-surface glass front with touch functionality and tactile feedback.
• Further information

Control device video REG Gira 128800, enclosed

• Control device for supplying the audio and video components of the Gira door communication bus.
• Supply of the reverse polarity protected and short-circuit proof 2-wire bus when using video components such as color camera, TFT color display.
• Up to 2 door stations with color camera and 28 home stations with TFT color display can be supplied via the video control device.
• A total of up to 15 color cameras can be controlled by the video control device (5 door stations video and 10 TKS camera gateways), of which two door stations with color camera can be supplied with voltage by the video control device. The other color cameras must each be operated with their own power supply for door communication.
• Self-resetting electronic short-circuit and overload detection of the operating voltages and the bus connection.
• Buttons for system and door opener programming.
• LED status indicators for operation, overload, system programming and door strike programming.
• AC 12 V output for powering a standard electric strike.
• Relay output for switching a door opener with its own power supply.
• Door opener switching time continuously adjustable from 1 to 10 s.
• Further information

Important information

Camera or intercom preparation

The intercom systems must be connected by an electrician. Please contact your local electrician for planning, installation and wiring.

Water protection

In order to achieve optimum water protection for your mail, the mailbox or mailbox system should, if possible, be located under a canopy.

Mail is only protected from water when it is completely inserted in the box and the insertion flap is closed. Mail that is not completely inserted allows moisture and dirt to enter the mailbox. Therefore, it is necessary to plan sufficiently sized mailboxes for the upcoming needs. In certain extreme weather conditions, water can still enter (according to DIN EN 13724 up to 1ccm). This is not a reason for complaint.