Stainless steel mailbox column designer model BIG - Comelit VIDEO Komplettset Wifi
incl. VAT plus shipping costs (exclusive of VAT for logged-in users with VAT ID and Non-EU countries)
Delivery time approx. 44-52 Business days
- Order number: 599B-KSCSWIFI
- Note: After your order, you will receive a design drawing by email as a PDF to realize your wishes even to the last detail. Here, your wishes will be addressed in detail.
Stainless steel mailbox column designer model BIG - Comelit VIDEO Komplettset Wifi
Stylish stainless steel column made of 2mm stainless steel V2A 1.4301, polished with backlit house number. Integrated Comelit VIDEO complete set Wifi. Comelit video intercom is an innovative solution with features such as facial recognition, Voice commands and operation via app with your smartphone. Completely pre-programmed for easy installation - connect 2 wires and DONE!
The column is fully welded, so no rivets or screws are visible. The letterbox module is also inserted into the pillar with invisible screws. The letterbox module is made of 2mm stainless steel V2A 1.4301, grinded and can be exchanged for a new letterbox module even after many years. With extra volume and newspaper insertion flap for very large mail volume. This mailbox stele is manufactured at Briefkasten Manufaktur. Made in Germany, Bad Salzuflen.
- The mailbox module is made of 2mm stainless steel V2A 1.4301, 240 grain ground.
- Front mail removal door 350 mm x 300 mm, to open from top to bottom. Incl. 2 keys with key number.
- Mail slot from front, dimensions of slot: W 35 cm x H 6.3 cm, C4 landscape. Very large letters fit in here without bending.
- With built-in damping elements, these let the insertion flap close slowly and quietly.
- Bell button made of stainless steel with changeable name plate, illuminated.
- The columns are equipped with modules that can be replaced later.
- Optionally with house number, backlit in white incl. EVN LED power supply / transformer IP65 12V/DC 0.1-4W for the LED lighting of the house number.
- The fully welded column is made of 2mm stainless steel V2A 1.4301, ground. Construction height is 1.70m.
- Invisible cable feed through the body is possible.
- The pillar is equipped with a base plate made of VA. This is 10 mm thick and is finished with a cover plate. This way the fixing dowels are concealed.
Important information
Camera or intercom preparation
The intercom systems must be connected by an electrician. Contact your trusted electrician for planning, mounting and installation.
Water protection
In order to achieve optimum water protection for your mail, the mailbox or mailbox system should, if possible, be located under a canopy.
Mail is only protected from water when it is completely deposited in the box and the insertion flap is closed. Mail that is not completely inserted allows moisture and dirt to enter the mailbox. Therefore, it is necessary to plan sufficiently sized mailboxes for the upcoming needs. In certain extreme weather conditions, water can still enter (according to DIN EN 13724 up to 1ccm). This is not a reason for complaint.
Dimensions & Details
| Number of parties: | 1 |
| Item withdrawal: | Front |
| Base material: | Stainless steel |
| Connection technology: | 2-wire bus technology |
| Height single box in cm: | 71,0 | 75,0 |
| Width single box in cm: | 41,0 | 45,0 |
| Volume single box in liters: | 31,0 |
| Height letter slot in cm: | 6,3 |
| Width letter slot in cm: | 35,0 |
| Overall height in cm: | 170,0 |
| Total width in cm: | 49.0 (footplate 58.0) |
| Depth in cm: | 15.0 (footplate 24.0) |
| Weight in kg: | 65,0 |
| Delivery condition: | Delivery is assembled |
| Shipping information: | Delivery by forwarding agent on one-way pallet. Before delivery, the forwarding agent will contact you by phone to arrange the date. |
The Comelit complete set in detail
The (video) intercom sets from COMELIT are simply connected using 2-wire technology. This means that the existing lines can be used and there are no additional costs for laying new lines and plaster or painting work. Simply lay 2 wires from the new power supply unit in the meter cabinet to the built-in loudspeaker or to the video loudspeaker in the function box of the mailbox system, as well as 2 wires from the power supply unit to the door station in the apartment. DONE. For the WiFi function of the home station 6741W, a WLAN within range is required.
++ ideal for conversion and renovation, as existing bell lines are used
++ no additional effort for plastering and painting work
++ Low cost due to simple installation
++ easy startup
Home station Mini WiFi handsfree 6741W (Video complete sets)
Color monitor with 4.3“screen 16/9, hands-free full-duplex and touch-sensitive buttons. Allows brightness, contrast control and adjustment of the strength of the audio signal and ringtone. Several melodies are available for personalization of the ringtone. Standard equipment with buttons for door opener, for activation/deactivation of voice connection with corresponding LED indicators.
The door station with Wifi interface is suitable for simulating home presence: in combination with the COMELIT app, calls can be answered from anywhere and doors and gates can be opened.
Mounting type: Surface mount.
Dimensions: 160 x 115 x 22 mm (WHD).
System components
Door station
Video loudspeaker 4681 (Video complete sets)
Color audio-video unit for 2-wire system, complete with front adjustable LED illuminated color camera. Equipped with terminal block, speech connection with echo cancellation, dustproof and waterproof loudspeaker, electret microphone and loudspeaker volume adjustable at the front. Additional visual and audible programmable handicap indicators. Integrated electronic door opener function (3 A) and additional relay contacts C, NC, NO with 10 A.
Resolution: 500x582 pixels
Detection angle: 100°
Dimensions: 102 x 55 x 38 mm (WHT)
Recommended height: 1400-1600mm
Home station
Call forwarding module - Gateway 1406A
This gateway makes it possible to receive the door call, for up to 4 participants, of a Simplebus 2 system with Art. 1209 or Art. 1210A on the smartphone (iOS or Android) without having an indoor station installed.
Mini WiFi handsfree 6741W (Wifi complete sets)
Color monitor with 4.3" screen 16/9, handsfree full-duplex and touch-sensitive buttons. Allows brightness, contrast control and adjustment of the strength of the audio signal and ringtone. There are several melodies to choose from to personalize the ringtone. Standard equipment includes buttons for door opener, for activation/deactivation of voice connection with corresponding LED indicators.
The door station with Wifi interface is suitable for simulating domestic presence: in combination with the COMELIT app, door calls can be answered from anywhere and doors and gates can be opened.
Mounting type: Surface-mounted
Dimensions: 160 x 115 x 22 mm (WHT)
The COMELIT app functions
- Receive calls from the door station wherever you are.
- View the recordings of the cameras of your installation (including the cameras of the door station).
- Retrieve the video messages from visitors recorded during your absence.
- Calling the internal devices of your system (internal audio and video stations).
- Open gates, doors and turn on the lights..
- The APP is based on PUSH notifications; this means a considerable energy and data saving, as the APP is only activated when a call is made, and much more.
The highlights Face recognition and voice commands
Easy integration with Amazon Alexa. This feature is available for free via the Mini Wi-Fi and is the incredible innovation that led to the creation of the first voice-controlled video intercom. You can integrate your Amazon Alexa with your Comelit video intercom in a few simple steps, without the help of a professional.
We already know that with one look the phone can be unlocked. Why shouldn't it also be possible to open the gate to the house? Comelit facial recognition is available for free and gives you the ability to manage access in your home (gates, front doors, traffic areas) with a simple glance, without having to use a key, app or anything else.
2-wire power supply 1209 (video complete set up to 4 participants)
Power supply unit for 2-wire systems for the supply of the external station (terminals L1 - L1) and the riser (terminals L2 - L2). Equipped with a terminal for line termination. Input voltage 110-240 V AC. Note: The power supply does not provide an interface for connecting external lighting such as for nameplates o.ä.
Dimensions: 106 x 89 x 62 mm (BHT) (6 DIN-Module)
2-wire power supply 1210A (video complete set from 5 participants)
Power supply unit with toroidal transformer, overload and short-circuit protection for the 2-wire system (SB2) for supplying the external station (L1-L1) and the riser (L2-L2). Equipped with a terminal for line termination Art. 1216. Input voltage 110-240V AC.
Dimensions: 141 x 89 x 62 mm (BHT) (8 DIN-Module)
Operating manual
You can find operating instructions for our products hereDeclaration of Conformity
Briefkasten Manufaktur - a tradition since 2003
At the Briefkasten Manufaktur you can order your letterbox, standing letterbox or your letterbox system with countless adjustments directly in the shop! The Briefkasten Manufaktur only uses systems, components and individual parts from well-known manufacturers from Germany. But our customer service does not end with your order: After your order, you will receive a design drawing by email as a PDF, so that your requirements can be realised down to the last detail. Your requirements will be dealt with in detail, usually even special requests that go beyond our range of configurations can be realised. After your production approval, your letterbox will be individually manufactured and delivered conveniently by parcel post. The customer service does not end here either, with coordinated packaging we ensure that the stainless steel letterboxes, letterbox systems, bells and lights are delivered to you in perfect condition. And if you do not like a product you have bought or something is not to your liking, you do not take any risks with us as a consumer. You can return our products within two weeks.
Variability through individual production
Every product at the Briefkasten Manufaktur is a unique product and is only handcrafted for you after you have placed your order. As a result, many of our products can already be ordered directly in the shop with endless adjustments. This is possible due to the modular structure, the flexible prefabrication, warehousing and logistics. Individual components are already prefabricated, so that in some cases very short delivery times can be achieved.
