Stainless Steel Letter Box Designer Model BIG - Clean Edition - Lateral - INDIVIDUAL

Stainless Steel Letter Box Designer Model BIG - Clean Edition - Lateral - INDIVIDUAL

High quality under- or wall-mounted mailbox from the mailbox manufacturer brand. A real eye-catcher among the mailboxes. Clear line and straightforward design characterize the designer mailbox free-standing. With a lot of volume for very large amounts of posts.

Our products have a high value, reliable functionality and their own identity. Made by mailbox manufactory.

• Designer stainless steel mailbox made of 2mm stainless steel V2A 1,4301, 240 grain sanded; Outside dimensions single box: height 550 mm; Width: 600 mm; Depth 100 mm.
• Fronts side post-withdrawal door 350 mm x 300 mm, to open from top to bottom. Including 2 key with key number.
• Settling from the front, dimensions of the insertion: W 35 cm x H 6.3 cm, C4 across. Very large letters fit here without kinking. Attention no withdrawal protection!
• With built-in damping elements, which let the throw-in flap slowly and quietly close.
• Optionally interchangeable name tag made of stainless steel with laser lettering or name tag made of plexi.
• 8-12V DC Kurzhub bell button with LED ring lighting (blue, white, red or green). The lighting of the bell button cannot be supplied by the control unit. It must be connected to an additional power supply 8-12 V DC.
• Optionally, a light button with a pictogram is possible.
• Preparation (installation speaker not included) for intercom.
• Optional with universal adapter for all commercially available installation speakers.
• Optional preparation (not included in the scope of delivery) for a camera.
• Optional with house number in polished optics (67mm high), offset or house number approx. 70mm high (max. 3-digit) with power-saving LED lighting 12V DC approx. 50mA / 1W, white.
• Dimensions Built-in- or wall-mounted box: H 510 mm x W 560 x D 100 | 150 mm. Built-in Kasten with pretzled cable inlets and fastening points on all sides. Wall-assembled box for wall assembly with hole in the back, wall-mounted box for fence mounting without perforation (must be done on site). Attention, even with wall-mounted boxes, the front cover 2 cm is all over again.

Camera or voice center preparation

We always recommend the electrical installation to be carried out by an electrical installer.

We offer the preparation of cameras & speakers from different manufacturers for our mailboxes. The preparation does not contain any end devices, which are the provision of the screw recordings, bores and perforations. So that you can easily install your device.

Water protection

In order to achieve optimal water protection of your post, the mailbox or the mailbox system should be under a canopy if possible.

The post office is only protected from water if it is completely stored in the box and the throw-in flap is closed. Unskined mail enables the penetration of moisture and dirt into the mailbox. It is therefore necessary to plan sufficiently dimensioned mailboxes for the upcoming need. In certain extreme weather conditions, water can still occur (according to DIN EN 13724 to 1ccm). This is not a reason for complaint.