€249.00*
delivery time ca. 1-3 business days
Audio REG control device
Control device for supplying the audio components of the Gira door communication bus.
- Supply of the reverse-polarity protected and short-circuit-proof 2-wire bus.
- Self-resetting electronic short-circuit and overload detection of the operating voltages and the bus connection.
- Buttons for system and door release programming.
- LED status indicators for operation, overload, system programming and door opener programming.
- AC 12 V output for the power supply of a standard electric strike.
- Permanent AC 12 V output for supplying power to a DCS-TC gateway.
- Relay output for switching a door opener with its own power supply.
- Door opener switching time continuously adjustable from 1 to 10 s.
Technical data
Nominal voltage primary: 230 V AC, 50 Hz
Secondary rated voltage: SELV 26 V DC ±2 V
Secondary rated current: 160 mA continuous load, 550 mA peak load (max. 5 s), overload cut-out from 350 mA
Screw terminals: 0.6 mm to 2.5 mm²
Door opener output: 12 V AC, 1.6 A / ED 25 %
Relay output: 30 V AC/DC, 2 A
Total cable length: max. 700 m
Cable length from the control unit to the furthest participant: max. 300 m with cable ø 0.8 mm, max. 170 m with cable ø 0.6 mm
Dimensions: REG device with 6 TE
Temperature range: -5 °C to +45 °C
Protection class: IP 20
Notes
- The audio control device is intended for installation in the sub-distribution board. If this is not possible, use a standard surface-mounted distributor.
- This component can be used to set up door communication systems with up to 70 users (e.g. 1 x built-in loudspeaker, 5 x extension module for built-in loudspeakers, 68 x surface-mounted home station).
Dahlienstraße 12
42477 Radevormwald
Deutschland
info@gira.de
| Width in mm: | 108 (6TE) |
|---|---|
| Height in mm: | REG |
| Depth in mm: | 65,0 |
| Weight in kg: | 0,2 |
Accessories
